- 1 How does a motor work in drilling?
- 2 How does a positive displacement motor work?
- 3 What is the source of energy for downhole motors?
- 4 Which motor is used in drill?
- 5 Which motor is used in cordless drill?
- 6 What is a drill collar?
- 7 Are mud motors good?
- 8 What is bottom hole assembly in drilling?
- 9 What is directional drilling used for?
- 10 What is SDMM in drilling?
- 11 What are mud motor used for?
- 12 Who invented the downhole mud motor?
- 13 What are the main three components of a mud motor?
How does a motor work in drilling?
When drilling in a straight line using a mud motor, every piece of the tool rotates. The power section of a mud motor consists of a rotor and stator. These two components harness the pressure and flow of the drilling fluid and translate it into torque and rpm that spins the drill bit.
How does a positive displacement motor work?
A downhole motor used in the oil field to drive the drill bit or other downhole tools during directional drilling or performance drilling applications. As drilling fluid is pumped through the positive displacement motor, it converts the hydraulic power of the fluid into mechanical power to cause the bit to rotate.
What is the source of energy for downhole motors?
The unique feature about downhole motors is that they are powered by the drilling mud itself. The motor converts the hydraulic power of the fluid into mechanical power so as to rotate the bit.
Which motor is used in drill?
Universal motors can run at high speeds and are light and compact. The portable drill machine is one of the applications of the universal motor.
Which motor is used in cordless drill?
Cordless drills have maintained the same kind of motor since its creation. Cordless drill motors are based off one of the earliest designs for motors; that is the brushed DC motor. The magnet-based motor requires direct voltage to make the motor work.
What is a drill collar?
Drill collars are thick-walled tubulars that are used at the bottom of the drill string (see Figure 4-1). Their principal purpose in the drill string is to provide the axial force needed to advance the drill bit (see Figure 2-2). When drilling a vertical borehole, the axial force is the weight of the drill collars.
Are mud motors good?
Mud motors are the perfect solution to these problems. They’re extremely powerful so you’ll always have enough torque to push through that mud or cut through those weeds. They’re also very durable and made from quality parts to ensure along life.
The bottom-hole assembly (BHA) is the component of the drill string. that includes the core bit, outer. core barrel, various subs, and the. drill collars.
What is directional drilling used for?
Directional drilling is the practice of accessing an underground oil or gas reserve by drilling in a non-vertical direction. Directional drilling is also called directional boring. Directional drilling increases the efficiency of oil and gas extraction, and can also lessen the environmental impact of drilling.
What is SDMM in drilling?
Steerable Downhole Mud Motor (SDMM) commonly referred to as Mud Motor or Drilling Motor acts much as a positive displacement motor which provides additional rpm to the drill bit from the flow of drilling fluid (mud). This drilling motor is far different from an electrical motor in it’s working principle and operation.
What are mud motor used for?
A mud motor is used for hunting waterfowl in the marshes, bogs, and waters where ducks are often found. Depending on the size of the mud motor, these shallow water boats carry large loads of decoys, guns, ammunition, food, fuel, hunting companions, dogs, and more, so you will never go without on any of your hunts.
Who invented the downhole mud motor?
DD-7: Downhole drilling motors were introduced by Dyna-Drill in 1958. Courtesy Baker Hughes Inc. Figure DD-8: By the 1970s, mud motors dominated directional drilling. As above, they were used with a bent-sub for directional kick off.
What are the main three components of a mud motor?
Power units of this type consist of several key elements: a power section, a transmission assembly, and a skew angle regulator. The working bodies of the motor are actually a rotor and a stator, and together they constitute a power section. It is rotated by a flow of fluid (drilling mud).